I am marking out the bits to build my case

I looked up the sizes, I measured the wood, I marked the wood, then discovered it was the wrong size.

Dads fault!

This bit is going to keep my cockpit floor up and my hull bottom down

Dad says if its his fault, he will have to stay at home and not take me to Mcdonalds

Ive just decided it wasnt dads fault after all !

Just screwing the back piece onto the next one so I can see where I need to glass it

Fixing the nose on

Making sure the numbers are all right before finishing cutting the curve

Screwing on the webs for the case to stand on

I screwed both sides together and got dad to plane it so both sides are level right the way along the length.

It is a bit heavy.